Quartz, granite, and butcher block templated, fabricated, and set by our own crew

Kitchen countertop installation Nashville TN built to last decades

When you book kitchen countertop installation Nashville TN homeowners can count on, you get a crew that templates on site, cuts in our own shop, and sets the slab level to within 1/16 inch. We handle kitchen counter replacement in Nashville TN for galley kitchens in Inglewood, open layouts in The Nations, and everything between. Most jobs are measured this week and installed within 7 to 10 days.

↗
Fast online booking

Request service today

Tell us what is happening. Our local team will confirm your visit shortly.

No spam. No obligation. Just practical help.
Thanks — we'll call shortly to confirm your visit.
Kitchen Countertop Installation by Mendaro Tech
Careful work. Honest options.
About this service

Kitchen countertop installation Nashville TN from template to caulk line

Kitchen countertop installation Nashville TN is the measured, fabricated, and sealed replacement of your existing work surface, including the cutouts for your undermount sink, faucet, and cooktop. It starts with a digital or physical template taken after the base cabinets are set and leveled. From that template we cut quartz, granite, marble, or butcher block, polish the edges, and dry-fit the pieces before they ever reach your door. The last step is setting the slab on a fresh bead of adhesive, shimming it flat, and sealing the seams and backsplash joint so water never finds a path behind the wall.

Most Nashville homeowners call us because a countertop has finally given out. Laminate from a 1990s flip is peeling at the sink edge, a granite seam has cracked over a dishwasher that walks, or a water damaged cabinet box has pulled the top out of level. If you are searching for kitchen countertop installation near me Nashville TN and want a crew that also handles the plumbing disconnect and the backsplash, we do both. We also take on affordable kitchen countertop replacement Nashville Tennessee projects where the cabinets stay and only the top changes.

  • ✓ Non-porous quartz that shrugs off stains
  • ✓ Correct cutouts for sink and cooktop
  • ✓ Level tops mean tight seams
  • ✓ A kitchen that appraises and sells faster
What's included

What our countertop installation includes

Every job includes the template, fabrication, install, and the plumbing reconnect for the sink and disposal. Here is what is covered and what we price separately if you want it.

✓

On-site template and level check

We template every run in person and check the cabinet boxes for level and water damage before cutting. If a box is soft or out of level, we tell you and price the fix before fabrication starts.

✓

Fabrication and edge polish

We cut the slab, pre-cut the sink and cooktop openings, and polish the edge profile you chose. Undermount sink clips are set and sealed in the shop so the sink is ready to drop in on install day.

✓

Removal and haul-away

We disconnect the plumbing, pull the old top, and haul it out. That includes the old backsplash tile if it is coming off with the top, and the cleanup of the adhesive and old caulk.

✓

Sink, faucet, and disposal reconnect

We reinstall your undermount or farmhouse sink, set the faucet, and reconnect the garbage disposal. Then we run water and test for leaks before we call the job done.

✓

Backsplash fit and seal

We cut and fit the 4-inch backsplash or the full-height tile you selected and seal the joint to the countertop with color-matched silicone. That joint is the one that keeps water out of the wall.

How it works

How our countertop installation process runs

01

On-site measure and template

We come out, check that the base cabinets are set and level, and take a template of every run, including the sink and cooktop cutouts. We note the overhang for seating, the backsplash height, and where the dishwasher and disposal sit. This visit takes 45 to 90 minutes and is when we catch a water damaged cabinet box or an out-of-square corner before it becomes a fabrication problem.

02

Material selection and layout

You pick the slab or the quartz color, and we lay out the template on the slab so the veining runs the way you want across the island. For granite countertops we mark the seam locations and show you the actual slab before cutting. We confirm edge profile, sink model, and faucet hole count in writing so there are no surprises on install day.

03

Fabrication in our shop

We cut on a bridge saw and CNC waterjet, polish edges with a router and wet polisher, and pre-cut the sink and cooktop openings. Undermount sinks get their mounting clips set and sealed to the underside of the slab in the shop, not on your kitchen floor. Fabrication takes 3 to 5 business days for most Nashville jobs.

04

Removal and installation day

We disconnect the plumbing, pull the old top, and haul it out. The new pieces come in on suction cups, set on adhesive over the leveled cabinets, and get shimmed flat. We reinstall the sink, faucet, and disposal, then cut and fit the backsplash. A typical kitchen takes 4 to 8 hours; a large kitchen with an island runs a full day.

05

Seal, clean, and walkthrough

We seal the seams and the backsplash joint with color-matched silicone, clean the surface, and run water through the faucet and disposal to check for leaks. You get a walkthrough of the finished work, care instructions for your specific material, and our workmanship warranty. We do not leave until the counter is level, the seams are tight, and the sink drains clean.

Tools & methods

Tools and methods behind a tight countertop install

Purpose-built equipment, used by trained technicians — so the job is done accurately the first time.

Laser level and stud finder

We laser level every cabinet run before templating and use a stud finder to locate framing for the backsplash and any wall-mounted pot filler. A run that is out of level by 1/8 inch shows up as an uneven backsplash line.

Bridge saw and CNC waterjet

The bridge saw makes the straight cuts and the CNC waterjet cuts the sink and cooktop openings to the appliance template. Waterjet cutting keeps the edge cool so quartz does not chip at the cutout corner.

Router and wet polisher

We cut the edge profile with a router and polish it wet to keep dust down and get a factory-quality edge. Wet polishing also keeps the stone from overheating and hazing.

Suction cup lifters and cabinet clamps

Slabs come in on suction cup lifters and get clamped to the cabinet run while the adhesive sets. That keeps a heavy quartz island top from shifting before the seam is pulled tight.

Caulking gun with color-matched silicone

We seal the backsplash joint and the seam with color-matched silicone, not grout. Silicone moves with the cabinet and stays watertight; grout cracks at that joint within a season.

Oscillating multi-tool and jigsaw

We use the oscillating multi-tool to cut out a damaged cabinet floor or trim a cabinet rail, and the jigsaw for the sink apron notch on a farmhouse sink. Both let us cut in place without pulling the whole cabinet run.

Real results

Before and after.

Peeling laminate to quartz in Crieve Hall

Before

A 1990s kitchen with laminate peeling at the sink edge and a drop-in sink leaking at the rim. The cabinet floor under the sink was soft and the countertop was out of level by a quarter inch.

After

We cut out the soft cabinet floor, sistered in new plywood, leveled the run, and installed a quartz top with an undermount sink and a new faucet. The sink sits flush, the leak is gone, and the top is level to within 1/16 inch.

Cracked granite seam to new quartz in Green Hills

Before

A granite top with a cracked seam directly over the dishwasher. The dishwasher walked on every cycle and the crack had widened to 1/8 inch, letting water into the cabinet box below.

After

We pulled the top, repaired the cabinet box, re-leveled the run, and installed a new quartz top with the seam moved off the dishwasher. We also secured the dishwasher so it stopped walking. The seam is hairline and the cabinet is dry.

Galley squeeze to workable aisle in Inglewood

Before

A galley kitchen with only 38 inches between the two runs. The old laminate top had a 12-inch overhang that narrowed the aisle further and made the kitchen hard to work in.

After

We measured the aisle, set the overhang so the walkway cleared 42 inches, and installed a quartz top with a single-bowl undermount sink to free up counter space. The galley now works on both sides.

Problems we solve

Countertop problems we fix for Nashville kitchens

Most countertop calls start with one of these four problems. If yours is on the list, we have seen it in a Nashville kitchen this month.

Ask a pro →
01

Cracked countertop at a seam over the dishwasher

We pull the top, check and repair the cabinet box, re-level the run, and set a new top with the seam moved off the dishwasher. We also check the dishwasher mounting so the vibration stops.

↗
02

Water damaged cabinet box under the sink

We cut out the damaged cabinet floor and rail, sister in new plywood, and seal it before templating. Then the new top goes on a solid, level base, and we fix the leak that caused it.

↗
03

Mold behind the backsplash from a bad seal

We remove the old backsplash, treat and replace any moldy drywall, and set the new backsplash tight to the countertop with a proper silicone joint. We also check the range hood ventilation while we are in there.

↗
04

Outdated laminate that will not hold a hot pan

We replace the laminate with quartz or granite, cut a proper undermount sink opening, and set the sink with clips sealed to the slab. The kitchen reads new and the sink stays put.

↗
Proof you can check

Licensed, insured, and accountable

✓
Tennessee Home Improvement LicenseTennessee Board for Licensing Contractors
✓
Davidson County Contractor LicenseMetro Nashville Codes Department
✓
EPA Lead-Safe Certified FirmU.S. Environmental Protection Agency
✓
OSHA 30-Hour Construction SafetyOccupational Safety and Health Administration
Good questions

Countertop questions Nashville homeowners actually ask

(615) 909-7503 →

Most Nashville kitchen countertop installation runs $3,200 to $8,500 for a standard 30 to 40 square foot kitchen, installed with a sink cutout and 4-inch backsplash. Quartz lands around $65 to $95 per square foot fabricated and installed; granite runs $55 to $85. A large kitchen with an island, a farmhouse sink, and a full-height backsplash can reach $12,000. Removal and haul-away of the old top adds $250 to $500.

The best installer is the one who templates in person, cuts their own material, and shows you the slab before cutting. Ask whether the crew is licensed in Tennessee, whether they carry a workmanship warranty, and whether the template and install are done by the same people. We are a new Nashville company founded in 2026, and we do all three. Call (615) 909-7503 and we will walk you through a recent Davidson County job.

Quartz is the best all-around choice for most Nashville kitchens because it is non-porous, needs no annual sealing, and handles humidity and temperature swings better than marble. Granite is a close second if you want natural stone and do not mind sealing once a year. Butcher block is warm and repairable but needs oiling every few months. Marble etches from acid, so keep it out of a heavy cooking kitchen unless you like the patina.

Plan on 7 to 10 days from template to installed top for quartz and granite, with 3 to 5 of those days in fabrication. Install day itself takes 4 to 8 hours for a standard kitchen and a full day for a large kitchen with an island. If you choose a solid surface or butcher block top we can often shorten the fabrication window. We schedule the template within a few days of your call.

Ready when you are

Book kitchen countertop installation Nashville TN this week

We template in person, cut in our own shop, and set the top ourselves. Most jobs are measured within a few days and installed in 7 to 10. Call (615) 909-7503 with your ZIP and we will confirm a template window.

Schedule My Template (615) 909-7503 →
Request an appointment

Call our Nashville kitchen remodeler

Call (615) 909-7503 or email [email protected] and we will set up a walkthrough. We answer the phone during business hours and keep the 24/7 line open for emergencies. Most estimates get scheduled within a few business days, and we give you a written number before any work starts.

Call anytime(615) 909-7503Email the office[email protected]
Office hoursOpen 24 hours · 7 days a week
Request received — our team will be in touch shortly.
Tap to call(615) 909-7503