Custom cabinetry, stone counters, and pro-grade appliances

Luxury kitchen remodel Nashville TN built to your spec

A luxury kitchen remodel Nashville TN homeowners actually enjoy starts with a plan that fits the house and the budget. We handle design, demolition, cabinetry, countertops, lighting, and appliance integration for high end kitchen remodel Nashville TN projects across Davidson County. If you want a kitchen that works as hard as you do, we should talk.

↗
Fast online booking

Request service today

Tell us what is happening. Our local team will confirm your visit shortly.

No spam. No obligation. Just practical help.
Thanks — we'll call shortly to confirm your visit.
kitchen Remodeler Near Me for Nashville homes
Careful work. Honest options.
About this service

What a luxury kitchen remodel Nashville TN involves

A luxury kitchen remodel Nashville TN is a full-scope rebuild of the room's layout, storage, surfaces, lighting, and appliances, not a cosmetic refresh. We pull the old cabinets and countertops, correct framing and plumbing rough-ins, run new circuits to code, and set shaker cabinets on a laser-leveled plane before quartz countertops go down. Every step is sequenced so the room comes back together tight, square, and ready for daily cooking.

Most Nashville homes we walk into have the same three problems: an outdated kitchen layout that blocks the cook, insufficient storage space, and poor kitchen lighting that makes the room feel smaller than it is. In older stock around East Nashville and Woodbine, we also find water damaged cabinet boxes and mold behind backsplash tile. A high end kitchen remodel Nashville TN corrects those issues at the framing level, so the finished kitchen is not just prettier, it is healthier and easier to live in.

  • ✓ Storage that actually fits
  • ✓ Surfaces built for real use
  • ✓ Lighting that changes the room
  • ✓ Appliances that earn their space
What's included

What a luxury kitchen remodel includes

A luxury kitchen remodel Nashville TN scope covers the full room, from demolition to the final walkthrough. Here is what is included in a standard build. Add-ons like layout changes, appliance upgrades, and structural work get priced separately after the walkthrough so you can see the cost before you commit.

✓

Full demolition and haul-away

We remove cabinets, countertops, flooring, and old appliances, then haul the debris. Walls get opened where plumbing and electrical need to move, and any water damage or mold gets addressed before the rebuild starts.

✓

Cabinetry supply and install

We supply and set KraftMaid, Merillat, or Thomasville cabinetry with soft close hinges and solid plywood boxes. Cabinet runs are leveled with a laser level and shimmed so doors and drawers line up clean across the room.

✓

Countertop template and install

Quartz, granite, marble, butcher block, or solid surface countertops get templated after cabinets are set, fabricated, and installed with an undermount sink cut and sealed on site. Seams are placed where they read least.

✓

Electrical, lighting, and ventilation

We run new circuits to NEC, install LED under cabinet lighting and layered fixtures, and duct the range hood to the exterior. Dimmers go on the main lighting runs so the room works for cooking and for dinner.

✓

Flooring and backsplash

Porcelain tile, luxury vinyl plank, or hardwood flooring goes down over a leveled subfloor. Backsplash tile, including subway tile and ceramic tile, gets set with tight grout lines and sealed where the material calls for it.

✓

Final walk and warranty

We test every circuit, faucet, disposal, and drawer before the final walk. You get care instructions for the stone and the cabinetry, plus a workmanship warranty in writing. Punch list items get handled before we close the job.

How it works

How our kitchen remodel process runs

01

Walkthrough and measure

We walk the kitchen with you, measure every wall, and photograph the existing plumbing, electrical, and ventilation. You get an honest read on what can stay and what has to go. This visit usually takes 60 to 90 minutes and ends with a clear scope, not a sales pitch.

02

Design and selections

We lay out the cabinet run, island, and appliance positions, then walk you through countertop slabs, backsplash tile, and flooring samples. You pick the finishes; we confirm the dimensions and the electrical load. Most clients lock selections within two to three weeks.

03

Permits and protection

We pull the Davidson County permits, post the required notices, and seal off the work zone with plastic and zip walls. Floors get protection board, and the rest of the house stays livable. Permit turnaround in Nashville usually runs 10 to 15 business days.

04

Demo and rough-in

We tear out the old kitchen, haul the debris, and open the walls for plumbing and electrical rough-in. Any water damaged cabinet boxes or mold behind the backsplash gets addressed now, not covered up. Rough-in inspection happens before a single cabinet goes in.

05

Install and final walk

Cabinets, countertops, tile, flooring, lighting, and appliances go in on a sequenced schedule. We test every circuit, every faucet, and every drawer before we call you in. The final walk covers the punch list, care instructions, and your workmanship warranty.

Tools & methods

Tools and methods we build with

Purpose-built equipment, used by trained technicians — so the job is done accurately the first time.

Table saw and miter saw

Used for cabinet modifications, trim, and precise cuts on site. A sharp miter saw is what makes a cabinet run read clean at the corners.

Laser level and stud finder

The laser level sets the cabinet plane and the backsplash line. The stud finder locates framing before we hang cabinets or drill for the range hood duct.

Oscillating multi-tool and jigsaw

For clean cutouts in drywall and cabinet backs when plumbing and electrical need to pass through. Precise cuts mean fewer patches later.

Tile cutter and caulking gun

The tile cutter handles ceramic tile and porcelain on the backsplash and floor. The caulking gun seals the sink, the backsplash, and the countertop seams.

Cabinet clamps and drywall lift

Cabinet clamps hold the boxes tight while the screws set. The drywall lift makes ceiling patches a two-person job instead of a four-person job.

Router and nail gun

The router cuts sink openings and edge profiles. The nail gun sets trim and paneling fast without splitting the material.

Real results

Before and after.

Green Hills galley opened up

Before

A 1990s galley kitchen with a wall between the cook and the dining room, one overhead light, and cabinets that no longer closed. The room felt half its size.

After

We removed the wall, moved the sink to the island, and installed a 9-foot quartz island with seating for four. Layered lighting and LED under cabinet runs brightened the room. The kitchen gained roughly 40 percent more usable storage.

East Nashville bungalow rebuild

Before

Water damaged cabinet boxes under a leaky sink, mold behind the old backsplash, and a range hood that vented into the room. The wiring was a patchwork of previous DIY work.

After

We replaced the cabinet run with solid plywood boxes and soft close hinges, corrected the plumbing, and ducted the new hood to the exterior. New circuits went in to NEC, and the backsplash went from moldy drywall to ceramic tile.

The Nations premium upgrade

Before

A newer build with a sound layout but builder-grade finishes, flat lighting, and an appliance package that did not match the rest of the home.

After

We set KraftMaid cabinetry with panel-ready Sub-Zero refrigeration and a Wolf range, added a Cambria quartz countertop, and rebuilt the lighting plan with dimmers. The kitchen now matches the home's price point.

Problems we solve

Kitchen problems we fix for good

Most of the kitchens we tear out were not badly built, they were built for a different decade. These are the problems our Nashville clients ask us to solve, and how we solve them.

Ask a pro →
01

Outdated layout that blocks the cook

We redraw the work triangle around the sink, range, and refrigerator, then move plumbing and electrical to match. The new layout gets confirmed against the real dimensions before demolition starts, so the room works the way you cook.

↗
02

Worn out cabinets and cracked countertops

We replace the cabinetry with solid plywood boxes and soft close hinges, and set new quartz or granite countertops on a leveled run. Any water damaged cabinet boxes get pulled and the wall behind them gets dried and repaired.

↗
03

Poor lighting and weak ventilation

We install layered lighting with LED under cabinet runs and dimmers, and duct the range hood to the exterior to code. The room gets bright where you prep and soft where you eat, and the air actually clears when you sear.

↗
04

Uneven flooring and a leaky sink

We level the subfloor before new flooring goes down, and we replace the sink, faucet, and disposal as part of the build. A Delta or Moen faucet and a properly seated undermount sink stop the leak at the source.

↗
Proof you can check

Licensed, certified, and accountable

✓
NARI Certified Kitchen and Bath RemodelerNational Association of the Remodeling Industry
✓
NKBA Certified Kitchen DesignerNational Kitchen and Bath Association
✓
Tennessee Home Improvement LicenseTennessee Board for Licensing Contractors
✓
Davidson County Contractor LicenseDavidson County
✓
EPA Lead-Safe Certified FirmU.S. Environmental Protection Agency
Good questions

Kitchen remodel questions we answer every week

(615) 909-7503 →

Most luxury kitchen remodel Nashville TN projects land between $75,000 and $150,000 in 2026, with larger full-scope builds running higher. Cabinetry and countertops drive the biggest swings, followed by appliance package and any layout changes that move plumbing or electrical. We give you a line-item range after the first walkthrough so you can see where the money goes.

The best luxury kitchen remodeler in Nashville Tennessee is the one who shows you a licensed, insured crew, a real schedule, and a workmanship warranty in writing. Check for a Tennessee Home Improvement License, a Davidson County Contractor License, and NARI or NKBA credentials. Ask to see a finished kitchen and talk to that homeowner. We will connect you with both.

A kitchen is luxury in Nashville TN when the layout, storage, lighting, and materials are all engineered around how you actually cook. That means custom or semi-custom cabinetry with soft close hinges, quartz or marble countertops, integrated Sub-Zero or Wolf appliances, layered LED lighting, and ventilation that actually clears the room. Price alone does not make it luxury; execution does.

A high end kitchen renovation Nashville Tennessee typically runs 10 to 16 weeks from demo to final walk, depending on scope and material lead times. Custom cabinetry can add four to six weeks, and slab countertops add two to three. We build those lead times into the schedule at kickoff so you are not guessing when you get your kitchen back.

Ready when you are

Start your luxury kitchen remodel Nashville TN

We give you a straight scope, a real schedule, and a workmanship warranty in writing. Call Mendaro Tech at (615) 909-7503 and we will set the first walkthrough. Licensed, insured, and building in Davidson County.

Book a walkthrough (615) 909-7503 →
Request an appointment

Call our Nashville kitchen remodeler

Call (615) 909-7503 or email [email protected] and we will set up a walkthrough. We answer the phone during business hours and keep the 24/7 line open for emergencies. Most estimates get scheduled within a few business days, and we give you a written number before any work starts.

Call anytime(615) 909-7503Email the office[email protected]
Office hoursOpen 24 hours · 7 days a week
Request received — our team will be in touch shortly.
Tap to call(615) 909-7503